Call 08048954342 76% Response Rate

Send Email

Monel 400 Products

Our range of products include monel 400 rods, nickel-copper alloy plates, monel 400 plate, monel 400 sheet, monel bar and uns n04400 pipe.
Monel 400 Rods

Monel 400 Rods

Product Price: Rs 1,500 / KilogramGet Best Price

Product Details:
Usage/ApplicationConstruction
Surface FinishingPolished
ShapeRound
Size/Diameter3.17 mm to 350 mm diameter
Single Piece Length>36 meter
CertificationISO
According to the needs and demands of our clients, we are engaged in offering a wide range of Monel 400 Rods all over the world. These rods are sturdily constructed and ensure optimum performance without any hassles. These products are procured from trustable vendors that ensure their smooth performance and reliability. We are offering these rods in different sizes and dimensions as per the needs.

Applications:
  • Boiler feed water heaters and other heat exchangers
  • Valves, pumps, shafts, fittings, and fasteners
  • Industrial heat exchangers
  • Chlorinated solvents
  • Crude oil distillation towers
Get Best QuoteRequest A Callback
Nickel-Copper Alloy Plates

Nickel-Copper Alloy Plates

Product Price: Rs 1,500 / KilogramGet Best Price

Product Details:
MaterialNickel-Copper Alloy
Width1000 ~ 2200 mm
Thickness0.3 ~ 100 mm

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Get Best QuoteRequest A Callback
Monel 400 Plate

Monel 400 Plate

Product Price: Rs 1,800 / KilogramGet Best Price

Product Details:
MaterialMonel
TypePlate
UsageIndustrial
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel 400 Sheet

Monel 400 Sheet

Product Price: Rs 2,000 / KilogramGet Best Price

Product Details:
ShapeSquare
FormSheet
Thickness0.1 mm to 150 mm
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel Bar

Monel Bar

Product Price: Rs 1,500 / KgGet Best Price

Product Details:
Size/Diameter2 inch, 1/2 inch, 3 inch, 4 inch, 1 inch
GradeK500
MaterialMonel
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F.
Get Best QuoteRequest A Callback
UNS N04400 Pipe

UNS N04400 Pipe

Product Price: Rs 1,400 / KilogramGet Best Price

Product Details:
Single Piece Length6 meter, 18 meter
ApplicationDrinking Water, Utilities Water
ShapeRound
AlloyWith Alloy
Length3 meter, 6 meter
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel Wire

Monel Wire

Product Price: Rs 1,200 / KilogramGet Best Price

Product Details:
Wire Gauge (mm)0-5, 5-10, 15-20, 20-25 mm
Diameter (mm)0.02 - 1 mm, 1-3 mm, 5-7 mm, 7-9 mm
InsulationYes
ConditionNew
AlloyWith Alloy
Monel 400 Wire

NIKKON STEEL & ALLOYS is a popular supplier of Monel wire for fishing and marine industry. Our Monel wire is known for its tight tolerance, smooth surface and uniformity throughout the length. In order to meet the demands of our potential clients, we offer the Monel wires in various dimensions such as in diameter 0.03 mm - 12 mm and shapes such as flat, square and shaped wires. Monel 400 wire is perfect to withstand internal or external



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),IMMEDIATELY
  • Port of Dispatch: MUMBAI
Get Best QuoteRequest A Callback
Monel Tube Fittings

Monel Tube Fittings

Product Price: Rs 250 / PieceGet Best Price

Product Details:
Size1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
ApplicationStructure Pipe
Head CodeRound
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel 400 Tubes
  • Monel 400 Tubes
  • Monel 400 Tubes

Monel 400 Tubes

Product Price: Rs 1,400 / KilogramGet Best Price

Product Details:
Single Piece Length18 meter, 6 meter, 36 meter
ApplicationDrinking Water, Utilities Water
Size/Diameter1 inch, 2 inch
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel 400 Fitting
  • Monel 400 Fitting
  • Monel 400 Fitting

Monel 400 Fitting

Product Price: Rs 500 / PieceGet Best Price

Product Details:
Size1/2 inch, 3/4 inch, 2 inch, 1 inch
ApplicationGas Pipe
TechniqueCasting
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
MONEL 400 FLANGES

MONEL 400 FLANGES

Get Latest Price

We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel Bolt
  • Monel Bolt
  • Monel Bolt

Monel Bolt

Product Price: Rs 25 / PieceGet Best Price

Product Details:
ShapeHex
Surface TreatmentBlack Oxide
MaterialMonel
Monel Bolt is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy Bolt is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy Bolt is rapidly attacked by nitric acid and ammonia systems.

Features:
  • Resistant to seawater and steam at high temperatures
  • Excellent resistance to rapidly flowing brackish water or seawater
  • Excellent resistance to stress corrosion cracking in most fresh waters

Applications:
  • Marine engineering
  • Chemical and hydrocarbon processing equipment
  • Gasoline and freshwater tanks
  • Crude petroleum stills
  • De-aerating heaters
Get Best QuoteRequest A Callback
Monel Flange
  • Monel Flange
  • Monel Flange

Monel Flange

Product Price: Rs 500 / KilogramGet Best Price

Product Details:
Size1-5 inch, 10-20 inch, 0-1 inch, 5-10 inch
Material StandardASTM A351, ASTM A105, ASTM A182, ANSI B16.5
Rated Pressure (Bar)120 bar
We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Monel Fasteners

Monel Fasteners

Product Price: Rs 220 / PieceGet Best Price

Product Details:
Surface FinishElectroplated
Diameter (Millimeter)15-25 mm
Head StyleHexagonal
We provide a unique range of Monel Fasteners, which is manufactured using premium grade of raw material like copper, brass, aluminum, phosphorus bronze, gun metal, lead, zinc, and more. Monel Fasteners available in Monel 400 Fasteners, Monel 500 Fasteners, industrial monel fasteners and many more.
Get Best QuoteRequest A Callback
MONEL PIPE

MONEL PIPE

Get Latest Price

We are the leading Wholesale Trader, Manufacturer and Exporter of the high-quality gamut of Titanium Grade Products, Stainless Steel Flanges, Nickel Products, Duplex Fittings, Stainless Steel Fittings, Copper Nickel Products, Inconel 601 Products and many more. The offered products are procured from reputed vendors of the market that manufacture the products using optimum quality raw material and sophisticated technology as per the international quality standards. Owing to their superior functioning, dimensional accuracy, durability and reliability, these products have a huge demand among clients all across the globe.
Get Best QuoteRequest A Callback
Alloy 400 Pipe

Alloy 400 Pipe

Product Price: Rs 1,400 / KilogramGet Best Price

Product Details:
Single Piece Length6 meter, 18 meter
ShapeRound
Surface FinishingPolished
ISO CertifiedISO Certified
Size/Diameter2 inch, 3 inch, 4 inch
Alloy 400 Pipe is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.
Get Best QuoteRequest A Callback
Nickel Copper Alloy Pipes
  • Nickel Copper Alloy Pipes
  • Nickel Copper Alloy Pipes

Nickel Copper Alloy Pipes

Get Latest Price

Product Details:
ApplicationUtilities Water, Drinking Water
Single Piece Length>36 meter
Size/Diameter2 inch, 4 inch
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Nikkon Steel & Alloys. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.